Every seller has opened a returned parcel to find a crushed corner, a bulging side or a wet, soft carton. In most cases the box did not fail by bad luck. It failed because something about the box, the packing or the handling did not match the job. This guide explains the most common causes and the practical fixes, so your next batch of boxes arrives in better shape.
1. The box is too weak for the weight
A 3 ply box that is fine for light garments may not be right for heavy items such as bottles, tools or machine parts. When the load is heavy, the walls bend, the flaps open and the bottom can give way. Moving to a 5 ply box, or to 7 ply for very heavy or export-type loads, adds wall thickness and stacking strength. Read our 3 ply vs 5 ply vs 7 ply guide to match the ply to your product weight.
2. The box is too big, or too small
An oversized box lets the product move around and leaves empty space that collapses when other parcels are stacked on top. An undersized box forces the product against the walls and makes the sides bulge. The best fit is a box with just enough room for the product plus its cushioning. If you are unsure of the right dimensions, use our box size calculator or read how to choose the right box size for shipping.
3. Empty space inside the box
Empty space is the quiet cause of many damage claims. A box that is only half full can cave in at the top when it is stacked under another carton. Fill gaps with paper, corrugated dividers or other cushioning so the load supports the walls instead of leaving them unsupported.
4. Poor stacking and loading
Corrugated boxes carry load best through their vertical walls and corners. Stacking boxes too high, placing heavy cartons on top of lighter ones, or overhanging boxes beyond the edge of a pallet all reduce the strength of the stack. Keep heavier boxes at the bottom, align the corners and avoid overhang.
5. Moisture and humid storage
Paper absorbs moisture, and a damp box loses strength quickly. Store cartons off the floor, away from walls that sweat and away from open doors during the rains. For goods that are exposed to damp or cold conditions, such as food, dairy or plants, talk to us about the right box for the job. See our page on corrugated boxes for food, dairy and plant brands.
6. Weak sealing
Even a strong box can open in transit if the tape is thin or applied badly. Use good quality tape, seal the centre seam fully and add tape along the edges for heavier parcels. Overfilled boxes whose flaps do not meet cannot be sealed properly, which brings us back to choosing the right size.
7. Using the same box for every product
Many businesses buy one standard size and use it for everything. This wastes money on filler and increases damage. A custom size matched to each product usually fits better, and it can also help control courier charges. Read how custom-size boxes can reduce your courier cost.
A quick checklist before you reorder
- Weigh your packed product and choose the ply accordingly.
- Measure the product and allow only the space needed for cushioning.
- Fill empty space inside the box.
- Check how the boxes are stacked and stored.
- Keep cartons dry and off the floor.
- Use proper tape and seal the seams fully.
Get boxes made for your product
NextInPack is a corrugated box manufacturer in Hyderabad. We make boxes to your size and ply. Tell us your product, its weight and the quantity you need, and we will suggest a suitable box. Use our order checklist to see what to send, or contact us for a quote. You can also see our e-commerce shipping boxes and custom corrugated boxes in Hyderabad.

No comment